Enphase IQ8P Microinverters
10 © 2024 Enphase Energy Inc. All rights reserved. January 2024
IOM-00002-1.0
The Enphase Energy System
The Enphase Energy System includes:
• IQ8P Microinverters: The smart grid-ready IQ8P Microinverters convert the DC output of the PV
module into grid-compliant AC power.
• IQ Gateway: An IQ Gateway (model ENV-S-AM1-230-60 or ENV-IQ-AM3-3P) is required to
monitor solar production, propagate a grid profile to the microinverters, and provide microinverter
control at sites where power export limitation (PEL) and phase imbalance management (PIM) is
required through advanced grid functionalities.
The IQ Gateway is a communication device that provides network access to the PV array. The
IQ Gateway collects production and performance data from the IQ8P Microinverters over onsite
AC power lines and transmits the data to the Enphase App through a broadband or cellular
connection. The IQ Gateway can monitor up to 600 IQ8P Microinverters and 39 IQ Batteries.
NOTE: All installations require that you use the Enphase IQ Gateway to commission the
microinverters to propagate correct grid profile settings. This will also ensure that the
microinverter’s firmware is upgraded whenever a newer version is available.
• Enphase Installer Portal: A web-based monitoring and management software. Installers can use
the Enphase Installer Portal to view detailed performance data, manage multiple PV systems, and
remotely resolve issues that might impact system performance. Find out more at
enphase.com/enlighten.
• Enphase Installer App: A mobile app for iOS and Android devices. It allows installers to configure
the system while onsite, eliminating the need for a laptop and improving installation efficiency. You
can use the app to:
o Connect to the IQ Gateway over a wireless network for faster system setup and
verification.
o View and e-mail a summary report that confirms a successful installation.
o Scan device serial numbers and sync system information with the Enphase Installer
Portal.
• IQ Field Wireable Connectors (Q-CONN-10F and Q-CONN-10M): Make connections from any
IQ Cable or open the IQ Field Wireable connector.
This manual describes the safe installation and operation of the IQ8P Microinverters.
NOTE: To ensure optimal reliability and to meet warranty requirements, Enphase
microinverters must be installed according to the instructions in this manual.
To Next Page
Loading...
Need help?
General