23
4. Select the length of time after which you want the scanner to automatically turn off when not in use
as the AC power or AC adapter setting. You can also select Power Off If Disconnected to turn off
the timer.
5. Turn on the Direct Power On setting if you want the scanner to turn on when it is connected to the
power source, without pressing the power button.
6. Click Set to save the settings.
7. Close the Epson Scan 2 Utility.
Parent topic: Product Basics
Available Software
The table below provides an overview of the software available for your product.
You can download and install the necessary software from the Epson website using the instructions on
the Start Here sheet.
Note: An internet connection is required to obtain the product software.
Software Description
Document Capture Pro
(Windows) or Document
Capture (Mac)
Allows you to easily and efficiently digitize originals if you want to save
scanned data to your computer. You can register a set of operations,
such as Scan-Save-Send, as a “job” and assign the job to the scanner's
control panel so you can perform the operation by simply pressing the
button. See the software help for detailed information on using the
application.
Epson Scan 2 Scanner driver that allows you to control the scanner. You can adjust
the size, resolution, brightness, contrast, and quality of the scanned
image. See the software help for more information on using the
application.
Note: For Windows Server operating systems, make sure the Desktop
Experience feature is installed.
To Next Page
Loading...
Need help?
General
