81
Paper type Paper size Paper thickness Loading capacity
Plastic cards,
embossed (ISO 7810
ID-1 compliant)
2.1 × 3.3 inches
(54 × 85.6 mm)
0.05 inch (1.24 mm)
maximum
1 card (horizontal)
Plastic cards, standard
(ISO 7810 ID-1
compliant)
0.03 inch (0.76 mm) to
0.04 inch (1.1 mm)
smaller than 0.03 inch
(0.76 mm)
Laminated cards 4.7 × 5.9 inches (120
× 150 mm) or smaller
0.03 inch (0.76 mm)
maximum
1 card
Note: Plastic cards with glossy surfaces may not scan properly.
Parent topic: Loading Plastic and Laminated Cards in the Input Tray
Loading Special Originals
You can load thick, folded, or irregularly shaped originals in the input tray using an optional carrier sheet.
You can also load envelopes. Make sure the originals meet the specifications for special originals before
loading them.
Note: Make sure there is enough space in front of the scanner for the ejected originals.
1. Make sure the scanner position light is on.
To Next Page
Loading...
Need help?
General
