47
7. Adjust the edge guides to fit the edges of the original or the carrier sheet (DS-C330) so that there are
no gaps. Otherwise, the original may skew.
8. Turn off the Detect Double Feed setting on the Main Settings tab in Epson Scan 2.
Note: When using Document Capture Pro, you can open the Epson Scan 2 screen by clicking the
Detailed Settings button on the Scan Settings screen.
When scanning with a carrier sheet (DS-C330), select Auto Detect as the Document Size setting in
Epson Scan 2 and Paper Skew as the Correct Document Skew setting.
The leading edge of the original must be placed at the binding edge of the carrier sheet when scanning
an original approximately 11.7 inches (297 mm) long. Otherwise, the length of the scanned image may
be longer than intended as the scanner scans to the end of the carrier sheet when you select Auto
Detect as the Document Size setting in the Epson Scan 2 window.
Only use a carrier sheet designed for your product. The carrier sheet is automatically recognized by the
product by detecting two small rectangular holes on the leading edge. Keep the holes in the carrier sheet
clean and uncovered. Do not use a carrier sheet that is scratched or has been scanned more than 3,000
times.
Parent topic: Loading Originals
Loading Long Paper
You can load long paper up to 120 inches (3048 mm) (DS-C330) or 220 inches (5588 mm) (DS-C490)
long in the input tray. Make sure the original meets the specifications before loading it.
Note: The scanning speed is slower when scanning long paper.
To Next Page
Loading...
Need help?
General
