Settings Menu
Submenu Function
Keystone
You can correct keystone distortion.
• When H/V-Keystone is selected:
Adjust V-Keystone and H-Keystone to correct horizontal
and vertical keystone distortion.
You can also set Auto V-Keystone and H-Keystone
Adjuster to On or Off. (EB-X14/EB-W12/EB-X12/EB-S12/
EB-X11 only)
• When Quick Corner is selected:
Select and correct the four corners of the projected image.
s "Quick Corner" p.38
Zoom
(EB-S12/EB-S11
only)
Adjusts the size of the projected image.
Control Panel
Lock
You can use this to restrict operation of the projector's control
panel.
s "Restricting Operation (Control Panel Lock)" p.60
Submenu Function
Pointer Shape
You can select the shape of the pointer.
Pointer 1:
Pointer 2:
Pointer 3:
s "Pointer Function (Pointer)" p.53
Power Consump-
tion
You can set the lamp brightness to one of two settings.
Select ECO if the images being projected are too bright, such as
when projecting images in a dark room or onto a small screen.
When ECO is selected, the power consumption and the lamp's
operating life are changed as follows, and fan rotation noise
during projection is reduced.
Electrical consumption: about 17.5% decrease, lamp life: about
1.25 times longer
When the projector is used at a high altitude or in a location
subject to high temperatures, the ECO setting may be used
automatically. If this happens, Power Consumption is grayed
out and cannot be adjusted.
Volume
You can adjust the volume. Setting values are saved for each
source.
Remote Receiver
You can limit the reception of the operation signal from the
remote control.
When set to Off, you cannot perform any operations from the
remote control. If you want to make operations from the remote
control, hold down the [Menu] button on the remote control for
at least 15 seconds to reset the setting to its default value.
User Button
You can select and assign an item from the Configuration menu
with the remote control's [User] button. Pressing the [User]
button directly displays the assigned menu item selection/
adjustment screen, allowing you to make one-touch changes to
settings/adjustments. You can assign one of the following items
to the [User] button.
Brightness Control, Info, Progressive, Test Pattern,
Resolution
List of Functions
70
To Next Page
Loading...
Need help?
General
Weight and Dimensions
