EasyManuals Logo
Home>Epson>Projector>EB-X11

Epson EB-X11 User Manual

Epson EB-X11
113 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #86 background imageLoading...
Page #86 background image
Check Remedy
Is the correct setting for the remote receiver selected? Check the Remote Receiver from the Configuration menu.
s Settings - Remote Receiver p.70
Other Problems
No sound can be heard or the sound is faint
Check Remedy
Check that the audio/video cable is securely attached to both the
projector and audio source.
Disconnect the cable from the Audio port, and then reconnect the cable.
Is the volume adjusted to the minimum setting? Adjust the volume so that sound can be heard.
s Settings - Volume p.70
s
"Adjusting the Volume" p.41
Is A/V Mute active? Press the [A/V Mute] button on the remote control to cancel A/V Mute.
s "Hiding the Image and Sound Temporarily (A/V Mute)" p.52
Is the audio cable's specification "No resistance"? When using a commercially available audio cable, make sure it is labeled "No resistance".
Is it connected with an HDMI cable?
(EB-X14/EB-W12/EB-X12 only)
If no audio is output when connecting via an HDMI cable, set the connected equipment to PCM output.
Is Output audio from the projector selected?
(Only when projecting USB Display)
Click All Programs - EPSON Projector - Epson USB Display - Epson USB Display Vx.xx Settings, and then select
Output audio from the projector.
The remote control does not work
Check Remedy
Is the remote control light-emitting area pointing towards the
remote receiver on the projector during operation?
Point the remote control towards the remote receiver.
s
"Remote control operating range" p.18
Is the remote control too far from the projector? The operating range for the remote control is about 6 m.
s "Remote control operating range" p.18
Problem Solving
86

Table of Contents

Other manuals for Epson EB-X11

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson EB-X11 and is the answer not in the manual?

Epson EB-X11 Specifications

General IconGeneral
Matrix size0.55 \
Projection distance1.8 - 2.17 m
Projection technologyLCD
Contrast ratio (typical)3000:1
Screen size compatibility30 - 300 \
Projector native resolutionXGA (1024x768)
Keystone correction, horizontal-30 - 30 °
Projector brightness (economic mode)2080 ANSI lumens
Aspect ratio4:3
RS-232 ports1
Dimensions (WxDxH)295 x 228 x 77 mm
Connectivity technologyWired
F-number (relative aperture)1.58
FocusManual
Offset8:1 %
Throw ratio1.48 - 1.77:1
Optical zoom1.2 x
Focal length range16.9 - 20.28 mm
Lamp typeUHE
Lamp power200 W
Light source typeLamp
Service life of light source4000 h
Service life of light source (economic mode)5000 h
DVI portNo
USB connector typeUSB Type-A, USB Type-B
HDMI ports quantity0
Serial interface typeRS-232
USB 2.0 ports quantity2
Full HDYes
Supported video modes1080i
Supported graphics resolutions1024 x 768 (XGA), 1920 x 1080 (HD 1080)
RMS rated power2 W
Image formats supportedBMP, GIF, JPG, PNG
Noise level37 dB
Preset modesCinema, Dynamic, Presentation, sRGB
Country of originChina
Noise level (economic mode)29 dB
Product typeStandard throw projector
Product colorWhite
Cable lock slot typeKensington
Power consumption (standby)0.47 W
Power consumption (typical)270 W
Pallet width800 mm
Pallet height2178 mm
Pallet length1200 mm
Pallet width (UK)1000 mm
Quantity per pack1 pc(s)
Quantity per pallet78 pc(s)
Quantity per pallet layer6 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth228 mm
Width295 mm
Height77 mm
Weight2300 g
Package depth358 mm
Package width357 mm
Package height156 mm
Package weight3500 g

Related product manuals