EasyManuals Logo
Home>Epson>Projector>EB-X11

Epson EB-X11 User Manual

Epson EB-X11
113 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #84 background imageLoading...
Page #84 background image
Check Remedy
Is the computer set for dual display?
(Only when projecting computer images)
If dual display is activated in the Display Properties of the computer's Control Panel, only about half of the image on the
computer screen is projected. To display the entire image on the computer screen, turn off the dual display setting.
s Computer video driver documentation
Is the correct resolution selected?
(Only when projecting computer images)
Set the computer so that the signals being output are compatible with the projector.
s "Supported Monitor Displays" p.102
s
Computer's documentation
Image colors are not right
Check Remedy
Do the input signal settings match the signals from the connected
device?
Change the following settings according to the signal for the connected equipment.
When the image is from a device connected to the Computer port
s Signal - Input Signal p.68
When the image is from a device connected to the Video or S-Video port.
s Signal - Video Signal p.68
Is the image brightness adjusted correctly? Adjust the Brightness setting from the Configuration menu.
s Image - Brightness p.67
Are the cables connected correctly? Check that all the cables required for projection are securely connected.
s "Connecting Equipment" p.23
Is the
contrast
g
adjusted correctly? Adjust the Contrast setting from the Configuration menu.
s Image - Contrast p.67
Is the color adjustment set correctly? Adjust the Color Adjustment setting from the Configuration menu.
s Image - Color Adjustment p.67
Are the color saturation and tint adjusted correctly?
(Only when projecting images from a video source)
Adjust the Color Saturation and Tint settings from the Configuration menu.
s Image - Color Saturation, Tint p.67
Problem Solving
84

Table of Contents

Other manuals for Epson EB-X11

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson EB-X11 and is the answer not in the manual?

Epson EB-X11 Specifications

General IconGeneral
Matrix size0.55 \
Projection distance1.8 - 2.17 m
Projection technologyLCD
Contrast ratio (typical)3000:1
Screen size compatibility30 - 300 \
Projector native resolutionXGA (1024x768)
Keystone correction, horizontal-30 - 30 °
Projector brightness (economic mode)2080 ANSI lumens
Aspect ratio4:3
RS-232 ports1
Dimensions (WxDxH)295 x 228 x 77 mm
Connectivity technologyWired
F-number (relative aperture)1.58
FocusManual
Offset8:1 %
Throw ratio1.48 - 1.77:1
Optical zoom1.2 x
Focal length range16.9 - 20.28 mm
Lamp typeUHE
Lamp power200 W
Light source typeLamp
Service life of light source4000 h
Service life of light source (economic mode)5000 h
DVI portNo
USB connector typeUSB Type-A, USB Type-B
HDMI ports quantity0
Serial interface typeRS-232
USB 2.0 ports quantity2
Full HDYes
Supported video modes1080i
Supported graphics resolutions1024 x 768 (XGA), 1920 x 1080 (HD 1080)
RMS rated power2 W
Image formats supportedBMP, GIF, JPG, PNG
Noise level37 dB
Preset modesCinema, Dynamic, Presentation, sRGB
Country of originChina
Noise level (economic mode)29 dB
Product typeStandard throw projector
Product colorWhite
Cable lock slot typeKensington
Power consumption (standby)0.47 W
Power consumption (typical)270 W
Pallet width800 mm
Pallet height2178 mm
Pallet length1200 mm
Pallet width (UK)1000 mm
Quantity per pack1 pc(s)
Quantity per pallet78 pc(s)
Quantity per pallet layer6 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth228 mm
Width295 mm
Height77 mm
Weight2300 g
Package depth358 mm
Package width357 mm
Package height156 mm
Package weight3500 g

Related product manuals