Automatically Detect Input Signals and Change
the Projected Image (Source Search)
Press the [Source Search] button to project images from the port currently
receiving an image.
Using the remote control Using the control panel
For EB-X21/EB-S21/EB-X17/EB-S17
For EB-X25/EB-W22/EB-X22/EB-X20
When two or more image sources are connected, press the [Source Search]
button until the target image is projected.
When your video equipment is connected, start playback before beginning
this operation.
a
The following screen is displayed while no image signals are input.
Example: For EB-X21/EB-S21/EB-X17/EB-S17
Projecting Images
35
To Next Page
Loading...
Need help?
General
