Epson EB-X25 User Manual

a
Start a Web browser on the computer.
b
Enter the IP address of the projector in the address input box of
the Web browser, and press the Enter key on the computer's
keyboard.
The Web Control screen is displayed.
When Web Control Password is set from the Configuration menu,
the password entry screen is displayed.
c
Enter the user ID and password.
Enter "EPSONWEB" as the user ID.
The initial password is "admin".
a
• Enter the user ID even if a password has not been set. You
cannot change the user ID.
• You can change the password on the Network menu from the
Configuration menu.
s Network - Basic - Web Control Password p.93
Displaying the Web Remote screen
The Web Remote function allows you to perform projector remote control
operations with a Web browser.
a
Display the Web Control screen.
b
Click Web Remote.
c
The Web Remote screen is displayed.
Name Function
A
Power button
[t]
Turns the projector power on or off.
s "From Installation to Projection" p.34
B
[Computer] button
Each time you press the button, the input changes between
images from the Computer1 port and the Computer2
port.
C
[Video] button
Each time the button is pressed, the image cycles through
the Video, S-Video, and HDMI ports.
D
[Freeze] button
Images are paused or unpaused.
s "Freezing the Image (Freeze)" p.58
Monitoring and Controlling
71

Epson EB-X25 Specifications

General

Brand	Epson
Model	EB-X25
Category	Projector
Language	English