Epson EH-LS800W User Manual

Solving Remote Control Operation Problems
105
If the projector does not respond to remote control commands, try the
following steps until the problem is solved.
a
If you lose the remote control, you can order another one from Epson.
a
Check that the remote control batteries are installed correctly and have
power. If necessary, replace the batteries.
b
Check that the input source is not set to HDMI3 (Game).
a
When the input source is set to HDMI3 (Game), some buttons
on the remote control are not available.
c
Check to see if a button on the remote control is stuck down, causing it
to enter standby mode. Release the button to wake the remote control
up.
d
Make sure you are operating the remote control within the reception
angle and range of the projector.
e
Check the status indicator to confirm that the projector is in normal
operating status.
f
Strong fluorescent lighting, direct sunlight, or infrared device signals
may be interfering with the projector's remote receivers. Dim the lights
or move the projector away from the sun or interfering equipment.
g
If the pairing screen is displayed, perform pairing again by holding
down the [Enter] button and button on the remote control at the
same time for about three seconds.
gg Related Links
• "Projector Parts - Projector Remote Control" p.13
• "Remote Control Operation" p.30
• "Projector Indicator Status" p.96
• "Installing Batteries in the Remote Control" p.30

Epson EH-LS800W Specifications

General

Heat dissipation	1.139 BTU/h
Number of colors	1.07 billion colors
Native aspect ratio	16:9
Vertical scan range	192 - 240 Hz
Projection technology	3LCD
Contrast ratio (typical)	2500000:1
Screen size compatibility	80 - 150 \
Projection distance (wide)	0.3 - 0.5 m
Projector native resolution	4K+ (5120x3200)
Light source type	Laser
Service life of light source	20000 h
Focus	Manual
Throw ratio	0, 16 - 0, 40:1
Zoom capability	Yes
Fixed focal length	2.3 mm
3D	No
Video color modes	Cinema, Dynamic, Natural, Vivid
HDMI version	2.3
HDMI ports quantity	3
USB 2.0 ports quantity	4
USB 2.0 Type-B ports quantity	1
Wi-Fi standards	802.11a, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Noise level	32 dB
Noise level (economic mode)	19 dB
High Dynamic Range (HDR) technology	High Dynamic Range 10 (HDR10), Hybrid Log-Gamma (HLG)
Placement	Ceiling, Desktop, TV cabinet
Product type	Ultra short throw projector
Product color	White
Market positioning	Home cinema
Cable lock slot type	Kensington
Power source	AC
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	2 W
Power consumption (typical)	350 W
Power consumption (economy mode)	217 W
Storage temperature (T-T)	-10 - 60 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	20 - 80 %
Quantity per pack	1 pc(s)

Weight and Dimensions

Depth	341 mm
Width	695 mm
Height	156 mm
Weight	12300 g