Epson EH-LS800W User Manual

Projector Placement
18
Warning
• Do not cover the projector's air intake or air exhaust vents. If the vents are
covered, the internal temperature could rise and cause a fire.
• Do not use or store the projector in locations where it will be subject to dust or
dirt. Otherwise, the quality of the projected image may decline, or the air filter
may become clogged, resulting in a malfunction or fire.
• Do not install the projector on an unstable surface or in a location beyond the
weight specifications of the projector. Otherwise, it could fall or topple causing
an accident and injury.
• When installing the projector in a high position, take measures to prevent falling
by using wires to ensure safety in an emergency, such as an earthquake, and to
prevent accidents. If it is not installed correctly, it could fall causing an accident
and injury.
• Do not install in locations where salt damage could occur, or in locations subject
to corrosive gas such as sulphuric gas from hot springs. Otherwise, corrosion
could cause the projector to fall. It could also cause the projector to malfunction.
Attention
• If you are using the projector at altitudes above 1,500 m, set the High Altitude
Mode setting to On in the projector's menu to ensure the projector's internal
temperature is regulated properly.
• Try not to setup the projector in locations subject to high humidity and dust, or
in locations subject to smoke from fires or tobacco smoke.
gg Related Links
• "Projector Setup and Installation Options" p.18
• "Precautions on Installation" p.19
• "Screen Size and Projection Distance" p.111
• "Projector Installation Settings - Installation Menu" p.80
• "Projector Feature Settings - Settings Menu" p.81
• "Changing the Image Size or Position (Flexible Picture)" p.63
• "Focusing the Image Using the Focus Lever" p.40
Projector Setup and Installation Options
You can set up or install your projector in the following ways:
Front/Rear
Front Upside Down/Rear Upside Down
a
• The default Projection setting is Front.
gg Related Links
• "Projection Modes" p.38

Epson EH-LS800W Specifications

General

Heat dissipation	1.139 BTU/h
Number of colors	1.07 billion colors
Native aspect ratio	16:9
Vertical scan range	192 - 240 Hz
Projection technology	3LCD
Contrast ratio (typical)	2500000:1
Screen size compatibility	80 - 150 \
Projection distance (wide)	0.3 - 0.5 m
Projector native resolution	4K+ (5120x3200)
Light source type	Laser
Service life of light source	20000 h
Focus	Manual
Throw ratio	0, 16 - 0, 40:1
Zoom capability	Yes
Fixed focal length	2.3 mm
3D	No
Video color modes	Cinema, Dynamic, Natural, Vivid
HDMI version	2.3
HDMI ports quantity	3
USB 2.0 ports quantity	4
USB 2.0 Type-B ports quantity	1
Wi-Fi standards	802.11a, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Noise level	32 dB
Noise level (economic mode)	19 dB
High Dynamic Range (HDR) technology	High Dynamic Range 10 (HDR10), Hybrid Log-Gamma (HLG)
Placement	Ceiling, Desktop, TV cabinet
Product type	Ultra short throw projector
Product color	White
Market positioning	Home cinema
Cable lock slot type	Kensington
Power source	AC
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	2 W
Power consumption (typical)	350 W
Power consumption (economy mode)	217 W
Storage temperature (T-T)	-10 - 60 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	20 - 80 %
Quantity per pack	1 pc(s)

Weight and Dimensions

Depth	341 mm
Width	695 mm
Height	156 mm
Weight	12300 g