69
List of ESC/VP21 Commands
Command List
When a power on command is sent to the projector, the power will turn on
and the projector will change to warm-up mode. When the power has
turned on, a colon ":" (3Ah) will be returned.
When the projector executes a command, it returns a ":" and waits for the
next command to be sent.
If command processing terminates with an error, the projector outputs an
error message and then returns the ":" code.
* When issuing any of the above commands, tack a Carriage Return (CR)
code (0Dh) on to the end.
Cable Layouts
Connector shape: USB (type B)
Item Command
Power ON/OFF
ON PWR ON
OFF PWR OFF
Signal selection
Computer (Auto) SOURCE 1F
Computer SOURCE 11
Component Video SOURCE 14
Video SOURCE 41
S-Video SOURCE 42
A/V Mute ON/OFF
ON MUTE ON
OFF MUTE OFF
A/V Mute Selection
Black MSEL 00
Blue MSEL 01
User’s Logo MSEL 02
USB connection
<At the projector
>
<At the computer
>
(type B)
To Next Page
Loading...
Need help?
General
