21
Functions for Enhancing Projection
Freezing the Image (Freeze)
The source image continues to project even when the screen is frozen. You
can still perform operations such as changing files, without projecting any
images.
PROCEDURE
You can turn this function on or off by pressing the [Freeze] button.
Changing the Aspect Ratio (Resizing)
This function changes the aspect ratiog of images from 4:3 to 16:9 when
component videog, S-Videog, or composite videog images are being
projected.
Images which have been recorded in digital video or onto DVDs can be
viewed in 16:9 wide-screen format.
PROCEDURE
The display is changed whenever you press the button.
•Sound does not stop.
•Even though the image on the screen is frozen, the
image source continues to project, and so it is not
possible to resume projection from the point where it
was paused.
•Pressing the [Freeze] button also clears configuration
menu displays and help messages.
•The freeze function still works while the E-Zoom
function is being used.
Remote control
You can also make this setting using the "Resize"
command in the "Signal" menu.
When images in squeeze
mode are projected at 16:9
When images in Squeeze
modeg are projected at 4:3
Remote control
To Next Page
Loading...
Need help?
General
