Epson LX-810 User Manual

Graphics
Individual graphics commands
There are four individual graphics commands that are very much
the same as the ESC 'N command, but each one works for only one
graphics option. Note that these commands contain one less
variable than the ESC command because they do not need to
select a graphics option.
They are shown below:
Command Function
ESC * Format
ESC K Single-density
ESC * 0
ESC L Double-density
ESC* 1
ESC Y Double-density, high-speed
ESC *2
ESC Z Quadruple-density
ESC *3
The reassignment command
The LX-810 has a command that allows you to change the graphics
option assigned to any of the four individual graphics options
commands.
The command looks like this:
ESC Ism
The letter s represents the command that you wish to change the
assignment for (K, L, Y, or Z) and m is the number of the graphics
option that you want to assign to it. For example, to change the
ESC K command to use the CRT 1 graphics option, the command
in BASIC is;
LPRINT CHR$(27);"?";"K";CHR$(4)
This is a quick way to change the aspect ratio of the design that
you are printing. Changing the graphics option will change the
width without changing the height.
4-20 Software and Graphics

Epson LX-810 Specifications

General

Brand	Epson
Model	LX-810
Category	Printer
Language	English