Epson LX-810 User Manual

Adjusting the Loading Position
The loading position is the point where the paper stops when you ^
load paper using the LOAD/EJECT button.
This position is important because it determines where the printing
begins on the page. If the printing is too high or too low on the ^
page, change the loading position using the micro-adjustment
feature described in the next section.
0
CAUTION: Never use the platen knob to feed paper
except in case of a paper jam or other paper feeding
problem. (If you need to use the platen knob, make sure
that the power is off.) If you need to adjust the loading
position, always use the micro-adjustment feature.
3-12 Using the Printer
Until the loading position is reset, the printer remembers this ^
position and uses it as a reference point for feeding paper. ^
The micro-adjustment feature moves the paper in 2/216th-of-an- ^
inch increments to make fine adjustments to the loading position.
Once you have used micro-adjustment to change the loading /***
position of continuous paper, the printer remembers that position
even after it is turned off.
However, when you use micro-adjustment to change the loading
position of single sheet paper, the printer does not remember this
position after the power is turned off. When the power is turned
back on, the loading position returns to its factory setting.

Epson LX-810 Specifications

General

Brand	Epson
Model	LX-810
Category	Printer
Language	English