Epson LX-810 User Manual

Selecting an International Character Set
International character sets provide you with the characters and
symbols used in other languages. You can select one of eight
international character sets by changing the DIP switch settings.
Whenever the printer is turned on, reset or initialized, the
character set selected by the DIP switches becomes the default
character set.
To select an international character set, set DIP switches 1-6, 1-7,
and 1-8 according to the table below.
This table also shows the characters which differ in each
international character set.
Country
ASCII code hex
DIP SW
23 24 40 5B 5C 50 5E 60 7B 7C 70 7E
1-6
1-7 1-8
0 U.S.A.
#$@[\] ^ ^ { ! } ^
ON ON ON
1 France
ON ON OFF
2 Germany
ON OFF
ON
3 U.K.
ON OFFOFF
4 Denmark 1
OFF
ON ON
5 Sweden
ItnfiAOAOeaSaii
OFF
ON OFF
6 Italy
OFF
OFF ON
7 Spain 1
OFF
OFF
OFF
(D
CAUTION: To change the setting of a DIP switch, first
turn off the printer, change the DIP switch setting, and
then turn the printer back on.
Using the Printer 3-23

Epson LX-810 Specifications

General

Brand	Epson
Model	LX-810
Category	Printer
Language	English