4. Hold down the cancel button and press the power button to turn the printer back on.
5. When the printer turns on, release both buttons.
The printer begins printing a nozzle check pattern.
6. Do the following, depending on the results of the printer check:
• If the page prints and the nozzle check pattern is complete, the printer is operating properly. Any
operation problem you may have could be caused by your computer, cable, software, or selected
settings. Check the other solutions in this manual or try uninstalling and reinstalling your printer
software.
• If the page prints but the nozzle check pattern has gaps, clean or align the print head.
• If the page does not print, the printer may have a problem. Check the other solutions in this
manual. If they do not work, contact Epson.
Parent topic: Solving Problems
Related concepts
Print Head Nozzle Check
Print Head Cleaning
When to Uninstall Your Product Software
Solving Setup Problems
Check these sections if you have problems while setting up your product.
Noise After Filling the Ink
73
To Next Page
Loading...
Need help?
General