Epson M200 User Manual

4. Follow the on-screen instructions to flush the ink tube.
5. When you finish flushing the ink tube, run a nozzle check to check the print quality. If necessary, also
clean the print head.
If you don’t see any improvement, turn off the product and wait at least 6 hours. Then check the print
quality again. If quality still does not improve, contact Epson for support.
Parent topic: Ink Tube Flushing
Print Head Alignment
If your printouts become grainy or blurry, you notice misalignment of vertical lines, or you see dark or
light horizontal bands, you may need to align the print head.
Note: Banding may also occur if your print head nozzles need cleaning.
Aligning the Print Head Using the Product Control Panel
Aligning the Print Head Using a Computer Utility
Parent topic: Adjusting Print Quality
131

Epson M200 Specifications

General

Print Speed (Black)	34 ppm
Print Resolution	1440 x 720 dpi
Paper Handling Output	30 sheets
Ink Colors	Black
Connectivity	USB, Ethernet
Scanner Type	Flatbed
Copy Speed	34 cpm
Paper Sizes	A4, A5, A6, B5
Ink Type	Pigment-based
Operating Systems	Windows XP / XP Professional / Vista / 7 / 8 / 8.1