Related topics
Refilling Ink
Print Head Cleaning
If print quality has declined and the nozzle check pattern indicates clogged nozzles, you can clean the
print head.
Note: You cannot clean the print head if the ink level has reached the lower line on the ink tank, and may
not be able to clean it when the ink level in the tank is low. You must refill the ink tank first.
Cleaning the Print Head Using the Product Control Panel
Cleaning the Print Head Using a Computer Utility
Parent topic: Print Head Maintenance
Related topics
Refilling Ink
Cleaning the Print Head Using the Product Control Panel
You can clean the print head using the control panel on your product.
1. Load a few sheets of plain paper in the product.
2. Press the Ajustes button.
3. Press the up or down arrow buttons to select Maintenance and press the OK button.
You see this screen:
4. Press the up or down arrow buttons to select Head Cleaning and press the Iniciar button to begin
the cleaning cycle.
Caution: Never turn off the product during a cleaning cycle or you may damage it.
The power light flashes throughout the cleaning cycle and stays on green when the cleaning cycle
is finished. You see this screen:
126
To Next Page
Loading...
Need help?
General