Epson TM-S1000 User Manual

CaptureOne User’s Manual 9
English
Connecting the Scanner to the Host Computer
Follow these steps to connect the scanner to a host computer.
1. Confirm that the power is not supplied to the scanner.
2. Start the TM-S1000 Utility included on the Utility & Documents CD.
CAUTION:
Starting the TM-S1000 Utility causes the USB driver to be installed. Be sure
to start the TM-S1000 Utility before connecting the scanner to a host
computer.
Note:
If the scanner is connected to a host computer before installing the USB
driver, the Found New Hardware Wizard will be displayed. In that case,
cancel the wizard and start the TM-S1000 Utility to install the USB driver.
3. When the TM-S1000 Utility has started, connect the scanner to the
host computer via the USB cable.
CAUTION:
Hook the USB cable on the USB cable securing hook to prevent the
cable from falling off. Be sure to use the USB cable that is included with
the scanner.
Note:
With the TM-S1000 Utility, you can check the operation of the scanner. For
more information, see the TM-S1000 Utility User’s Manual.
USB connector
USB cable securing hook
USB cable

Epson TM-S1000 Specifications

General

Film scanning	No
Grayscale levels	256
Input color depth	- bit
Maximum scan size	120 x 235 mm
Scanner type	Sheet-fed scanner
Sensor type	CIS
Scan media weight	60 - 120 g/m²
Dimensions (WxDxH)	160 x 355 x 176 mm
Standard media sizes	Length: 120 mm - 235 mm (approx 4.8 in - 9 in), Height: 68mm - 120 mm (approx 2.7 in - 4.8 in), Thickness: 0.075 x 0.2 mm (approx 0.003 in - 0.008 in), Weight: 60 - 120 g/m2 (approx 16lb - 32lb)

Weight and Dimensions

Depth	355 mm
Width	160 mm
Height	176 mm
Weight	4000 g