Epson TM-S1000 User Manual

12 CaptureOne User’s Manual
English
Installing and Replacing the Franking Cartridge
CAUTION:
Keep the franking cartridges out of the reach of children.
Do not disassemble franking cartridges.
Be careful during handling because the ink can permanently stain
clothing.
Seiko Epson recommends using genuine Epson cartridges for your scanner.
Products of other manufacturers may adversely affect the scanner and
printing quality, and may result in the scanner not being able to achieve
the specified performance levels.
Do not remove the franking cartridge from the packing box until
immediately before its installation. Leaving the cartridge out of its packing
for a prolonged period of time may adversely affect printing quality.
Use up the franking cartridge within 18 months from the date of production
indicated on the cartridge box.
Dispose of the franking cartridge in accordance with any relevant national
or local laws, ordinances, and regulations.
Follow these steps to install a franking cartridge for the first time or to
replace it.
1. Open the franker cover. (See “Opening the Franker Cover” on
page 11.)
2. If a used franking cartridge is installed, hold the knob at the top of the
cartridge and lift the cartridge out of the scanner.
3. Carefully insert a new franking cartridge from the top, and push it
firmly but gently until it clicks in place.
4. Close the franker cover firmly until it clicks in place.
Franking cartridge

Epson TM-S1000 Specifications

General

Film scanning	No
Grayscale levels	256
Input color depth	- bit
Maximum scan size	120 x 235 mm
Scanner type	Sheet-fed scanner
Sensor type	CIS
Scan media weight	60 - 120 g/m²
Dimensions (WxDxH)	160 x 355 x 176 mm
Standard media sizes	Length: 120 mm - 235 mm (approx 4.8 in - 9 in), Height: 68mm - 120 mm (approx 2.7 in - 4.8 in), Thickness: 0.075 x 0.2 mm (approx 0.003 in - 0.008 in), Weight: 60 - 120 g/m2 (approx 16lb - 32lb)

Weight and Dimensions

Depth	355 mm
Width	160 mm
Height	176 mm
Weight	4000 g