Epygi QX series User Manual

Hidden Pages for QX Advanced Configuration
1 Introduction
Along with the regular web management pages available for the administrator, the Epygi QXs contain
a number of hidden pages that allow advanced configurations in the system. The default system
settings will work for most applications but they can be changed if required. Some hidden
pages also provide access to troubleshooting tools to collect additional information.
This document describes the frequently used hidden pages available on the Epygi QX systems,
provides explanations of the most commonly used options and parameters to help administrators
identify and resolve issues that cannot be resolved through the QXs documentations.
Please Note: The hidden pages contain low-level system settings and are mainly intended for
Epygi’s technical support engineers and advanced distributors for fine-tuning the system in some
specific configuration scenarios. Wrong or inappropriate configuration of these settings may result in
undesired system behavior. It is strongly recommended to leave the default settings if the meanings
are not fully understood.
2 List of Hidden Pages
The list of frequently used hidden pages with their brief descriptions is presented in the Table 1.
Pages
Description
1.
advanced
Allows switching off the software watchdog and
changing the default http/https server ports.
2.
callcontrol
Allows making auto-generated call on the IP PBX
3.
codecsconfig Allows configuring voice codec settings.
4.
extmenegement
Allows configuring certain advanced settings for
extensions and attendants.
5.
fxocfg
Allows adjusting FXO general configurations.
6.
fxoconfig
Allows configuring FXO lines’ settings.
7.
fxodisconnect
Allows selecting one of the five basic scenarios for call
disconnection.
8.
generalconfig Allows configuring the system general settings.
9.
lantable
Allows packet traffic prioritization based on IP address.
10.
linesconfig
Allows configuring FXS lines.
11.
netcapture
Allows making packet captures from a specified
network interface.
12.
networkphycfg
Allows configuring speed and mode parameters for
LAN and WAN interfaces
13.
trunkecho
Allows configuring echo settings of ISDN, E1/T1 trunks.
Revision 1.0 4 20-Feb-15

Epygi QX series Specifications

General

Brand	Epygi
Model	QX series
Category	PBX
Language	English