Evinrude B4R4 User Manual

26
ENGINE OPERATION
6
3. Starting
①
Place the shift lever in the neutral
position.
(R)
N
(F)
Shift Lever
②
Attach the stop switch tether to
a secure place on your arm or
clothing. And then, install the lock
plate into the engine stop switch.
Stop switch
Lock
Hook
Lanyard cord
Hook
Stop switch
Stop switch lock
!
WARNING
Accidental activation of the Emergency
Stop Switch (such as the tether being
pulled out in heavy seas) could cause
passengers to lose their balance and
even fall overboard, or it could result
in loss of power in heavy seas, strong
currents, or high winds. Loss of control
while mooring is another potential
hazard.
To minimize accidental activation of the
Emergency Stop Switch, the 500 mm
(20 inch.) stop switch tether is coiled
and can extended to a full 1,300 mm (51
inch.).
③
S e t th e t hro tt l e gr ip t o s lo w
position.
Shift Lever
Choke Knob
SLOW
HIGH
Throttle
Grip
④
Pull the choke knob out. (Pulling
the choke knob is not necessary
when the engine is warm. If the
engine is warm, open the throttle
grip until the triangular mark.)
⑤
Gentry pul the starter handle
until you feel slight resistance
(engagement) and strangly pull
the handle without a rest.
Quickly Slowly
OM_E_4HP_body_111213.indd 26 11/12/13 13:20

Evinrude B4R4 Specifications

General

Brand	Evinrude
Model	B4R4
Category	Outboard Motor
Language	English