Installation
8.
310
· 310 ·
Ref.1912
DDS
HARDWARE
8.7 Check the installation
Check the installation:
Mechanical fixtures for the whole system
Distances
Tighten all the mounting screws with their corresponding tightening
torque.
Electrical connections and wiring:
Connection of protection wires
Fuses, value and type
Ends of the wires of the cables
Cables and connectors installed correctly
Mechanical latches of the connectors
Control cables
Necessary shielded connections according to EMC
Compliance with electromagnetic compatibility measures
Satisfactory covers and seals of the electrical cabinet to reach the
necessary protection level.