When the THERMAL STOP is activated (Thermal Stop YES) the phase time does not start to run
until the programmed temperature is reached in order to ensure a correct wash.
If this is disconnected, the time will start to run from the moment the programmed level is reached.
Press to return to the initial screen.
1.7 HUD
On the OPL configuration menu screen select the icon , which permits the configuration of
the parameters to be displayed on the OFF screen, main screen and run screen, in addition to
configuration of the automatic shutdown and energy saving.
Press to return to the initial configuration screen.
1.7.1 OFF screen
On the HUD configuration menu screen, in the OPL configuration, these are the parameters that
can be configured, by pressing the button .
To Next Page
Loading...
Need help?
General
