Pressing the weight setting option is disabled.
Pressing activates the auto-weight setting.
Pressing the manual weight setting is activated
Pressing activates the smart weight setting.
Press to return to the initial configuration screen, or press to return to the
initial configuration screen and confirm the changes.
1.16 RABC
On the initial configuration screen, select the icon , and go to the RABC / Traceability menu,
where the information about each wash is recorded and the following information is saved.
▪ At the start of each cycle: Programme, start time, weight (where applicable).
▪ During the programme, every 15 seconds: Level, temperature and error (where
applicable).
When downloading the data, the required period must be selected (by default, start date and end
date, today's date).
The data should be saved for a minimum of 15 days.
Every time a download is made, a folder is created with NumSeries_Date_Time, creating a
“.haccp” file for each of the programmes that has been run.
To Next Page
Loading...
Need help?
General
