Fav 900
Engine / Lubrication
Removing and refitting oil pan
G
Repair
Fav 900 chassis number 23/3001 and up
14.02.2001
2312 000003
G
a
3/3
Capitel Docu-No.
Index
Date Version
Page
Removing and refitting oil pan
PM-Picturemodule
PM-Picturemodule
PMTAB_Picture
Refitting the oil pan
Coat oil pan sealing surface with sealing
compound "Terostat 63" avoiding bore holes.
Note:
The lenght of time between applying "terostat
6" and assembling must not exceed 20
minutes.
PMTAB_Picture
Using a jack, slowly raise the oil pan to the
intermediate flange and insert fscrews.
Tighten screws.
Fit clean drain plug together with new seal and
tighten to specified torque.
Refill with new engine oil.
Check the oil pan for leaks
To Next Page
Loading...
General