Fermax SMILE 3.5” Monitor User Manual

Page 48
SMILE VDSSMILE VDS
SMILE VDSSMILE VDS
SMILE VDS
SMILE VDSSMILE VDS
SMILE VDSSMILE VDS
SMILE VDS
2. Doorbell
The monitor has two terminals (-,T) to connect an external button so that when a short
occurs between them an identification call tone is generated.
As previously discussed, the door´s ringtone can be configured within the ringtone
menu: a3) The doorbell.
Notice:
- Function assigned by the installer. Consult the installer.
Via the MENU.
(Pressing "Menu" for 3 seconds. ).
The same operation can also be performed via the menu´s icon.
If you want to select this mode indefinitely
(- - : - -), upon entering in this screen the
first number is blinking, press + until you
view the cursor - , press , the remaining
digits automatically turn into cursors
(- - : - -), therefore the indefinite mode is
on. Continue pressing
, until you reach
the desired menu or you exit programming.
_ _ : _ _
do not
disturb
mode
activated
Having selected the do not disturb mode
by pressing , we disable the selection
(the red led bell disappears). In order to
select it again, re-press .
do not
disturb
mode
deactivated

Fermax SMILE 3.5” Monitor Specifications

General

Brand	Fermax
Model	SMILE 3.5” Monitor
Category	Intercom System
Language	English