– 19 –
ARMING ALL PROTECTION
(With Entry Delay OFF)
Using the
4 MAXIMUM
Key
Use this key when the premises will be vacant for extended periods of time such as vacations,
etc., or when no one will be moving through protected interior areas.
When armed in MAXIMUM mode, the system will sound an alarm if a protected door or window
is opened, or if any movement is detected inside the premises. You may leave through the
entrance door during the exit delay period without causing an alarm, but an alarm will be
sounded as soon as someone re-enters.
Close all protected perimeter windows and doors before arming (see CHECKING FOR
OPEN ZONES section). The green READY indicator on the keypad should be lit if the system is
ready to be armed.
MAXIMUM
1. + 4 ENTER SECURITY CODE THEN PRESS MAXIMUM
(Security Code)
Example: 7 2 9 6 then press the MAXIMUM key.
2.
ARMED
*
MAXIMUM
*
YOU MAY E XIT NOW
The "You May Exit Now"
portion of the message
disappears when the exit
delay expires.
LISTEN
The keypad will beep twice, or beep continuously if exit
warning has been programmed for your system, and will
display the armed MAXIMUM message (AWAY/INSTANT on
fixed-word keypads). The red ARMED indicator also lights.
To Next Page
Loading...
Need help?
General
