– 9 –
ABOUT THE KEYPADS
General
Your keypads allow you to control all system functions. The keypads feature a telephone
style (digital) keypad and a Liquid Crystal Display (LCD) which shows the nature and location
of all occurrences.
The keypads also feature a built-in sounder which will sound during alarms and troubles. The
keypads also "beep" during certain system functions, such as during entry/exit delay times, in
CHIME mode, and when depressing any of the keys (to acknowledge the key press).
There are two basic types of keypads – a Fixed-Word keypad and an Alpha key-pad (both
described below). Fixed-Word and Alpha keypads are functionally the same, even though
they have different types of displays.
2-Line Alpha Keypad
2-line Alpha keypads feature a 2-line, 32-character alphanumeric LCD which can display
system messages in friendly English. These keypads can also be programmed with custom
zone descriptors. The screen displays depicted throughout this manual are examples of
displays that would typically appear on a 2-line Alpha keypad.
1-Line Alpha Keypad
1-line Alpha keypads feature a 16-character alphanumeric LCD which can display system
messages in friendly English. Messages are the same as those for 2-line Alpha keypads, but
are displayed one line at a time. To view the second line of the message, simply press the
# key. To return to the first line, press the # again, or wait 3 seconds.
After pressing the # key, wait at least 3 seconds before entering a command.
Fixed-Word Keypad
Fixed-Word keypads are functionally identical to Alpha keypads, but the LCD display uses
pre-designated words to identify the nature and location of occurrences.
Fixed-Word keypads are available with two styles of displays, “A” or “B” (see page 11),
depending on keypad used.
To Next Page
Loading...
Need help?
General
