– 23 –
CHIME MODE
Using the 9 Key
†
or selected doors or
windows if chime-by-zone
feature is active. Ask
installer if this feature
applies to your system.
Your system can be set to alert you to the opening of any door or window
†
while it is disarmed
by using CHIME mode. When activated, three beeps will sound at the keypad whenever a
protected perimeter door or window is opened. Pressing the READY key will display the open
protection points.
Note that the Chime mode can be activated only when the system is disarmed.
To turn Chime Mode on:
CHIME
1. + 9 ENTER SECURITY CODE THEN PRESS CHIME
(Security Code)
Example: 7 2 9 6 then press the CHIME key.
2.
DISARMED CHIME
READY TO ARM
VIEW
The “Chime” message displays while chime mode is on.
To turn Chime Mode off:
CHIME
1. + 9 ENTER SECURITY CODE THEN PRESS CHIME
(Security Code) Example: 7 2 9 6 then press the CHIME key.
2.
***
DISARMED
***
READY TO ARM
VIEW
The “Chime” message disappears from the display.
To Next Page
Loading...
Need help?
General
