■ Safety with temperature alarms (multi-camera applications), fire prevention, critical
vessel monitoring, and power utility asset management
■ Volume-oriented industrial control (multi-camera installation is possible)
6.5 FLIR A615
T638519;a1
The FLIR A615 camera has features and functions that make it the natural choice for
anyone who uses PC software to solve problems and needs 640 × 480 pixel resolution.
Among its main features are GigE Vision™ and GenICam™ compliance, which makes
it plug-and-play when used with software packages such as IMAQ Vision and Halcon.
Key features:
■ Affordable
■ GigE compliant
■ GenICam compliant
■ Trigg/synchronization/GPIO
■ 16-bit 640 × 480 images @ 50 Hz, signal, temperature linear, and radiometric
■ Windowing mode: 640 × 240 @ 100 Hz or 640 × 120 @ 200 Hz
■ Compliant with any software that supports GenICam, including National Instruments
IMAQ Vision and Stemmers Common Vision Blox
■ Open and well described TCP/IP protocol for control and set-up
■ Lenses: 25° included, 15° and 45° optional
Typical applications:
■ High-end infrared machine vision that needs temperature measurement
■ Slag detection
■ Food processing
■ Electronics testing
■ Power resistor testing
■ Automotive
12 Publ. No. T559498 Rev. a461 – ENGLISH (EN) – August 19, 2010
6 – Overview of camera models
To Next Page
Loading...
Need help?
General
