8.3 Installation
General
Last-minute changes and other important information can be found in the read-me
file on the CD-ROM. We recommend that you read this file before you install the
programs.
NOTE
If you experience problems during the installation, please visit our Customer Help
by pointing your browser to http://support.flir.com.
■
■
You must be an Adminstrator or a user with Administrative Rights to install the
programs.
■
A complete installation consists of several subinstallations, some of which are
from third-party vendors. Do not abort these subinstallations, as they are needed
for the complete installation.
■
A complete installation can take up to 10 minutes to complete.
Procedure
Follow this procedure:
Close down all applications.1
Insert the ThermoVision™ System Tools & Utilities CD-ROM into the CD-
ROM drive on the computer. The installation should start automatically.
Should the installation not start automatically, start Windows
®
Explorer and
double-click SETUP.HTM on the CD-ROM.
2
Click one of the following:
■
Install FLIR IP Config.
■
Install FLIR IR Monitor.
■
Install FLIR Camera Player.
■
Install AXXX Control & Image Interfaces.
3
Follow the on-screen instructions.4
16 Publ. No. T559498 Rev. a461 – ENGLISH (EN) – August 19, 2010
8 – Installation
To Next Page
Loading...
Need help?
General
