Advanced Thermal Solutions SC5000 User Manual
DCOO2U-L SC5000 User Manual Page 13
6.2. Change of filter wheel
The filters are extremely fragile elements
Take great care when handling them. Use rubber fingers protection
and optical tissue for handling filters.
Prepare the necessary equipment.
See cleaning optics chapter (cf.§7.1).
Check that filters are clean.
See chapter 7.1 for cleaning instructions. Any finger mark must be
cleaned immediately.
Turn the wheel thread clockwise. Pull the thread until the wheel comes
out. Store immediately the wheel in its case. Take care not to touch the
filters.
Replace the cap or another wheel proceeding the opposite way. It is
important not to leave the camera without cap or wheel so that dust
cannot enter the camera.
To Next Page
Loading...
Need help?
General
