Fluke ProcessMeter 789 User Manual

789
Users Manual
4
Table 1. International Symbols
Symbol Meaning Symbol Meaning
Alternating current Earth ground
Direct current Fuse
c
Alternating or direct current Conforms to European Union directives
Risk of danger. Important information.
See manual.
Conforms to relevant Canadian
Standards Association directives
Battery
T
Double insulated
Listed
950 Z
Meets Underwriters’ Laboratories safety
requirements
Inspected and licensed by TÜV Product
Services
CAT III
Overvoltage (Installation) Category III,
Pollution Degree 2 per EN61010 refers to
the level of Impulse Withstand Voltage
protection provided. Typical locations
include: mains, wall outlets, main
distribution levels connected closer to the
supply system but less than the primary
supply system (CAT IV).
N10140
Conforms to relevant Australian
standards

Fluke ProcessMeter 789 Specifications

General

Diode test	Yes
Frequency range	0 - 19.999 kHz
AC current range	0 - 1 A
AC voltage range	0 - 1000 V
Resistance range	0 - 40000000 Ω
Resolution (AC voltage)	0.1 mV
Dimensions (WxDxH)	100 x 203 x 50 mm

Weight and Dimensions

Weight	610 g