DUAL AUTOMATIC TEMPERATURE CONTROL (DATC) SYSTEM
WITH HEATED SEATS (IF EQUIPPED)
Temperature conversion: To switch between Fahrenheit and Celsius,
refer to Message center in the Driver Controls chapter.
MAX A/C setting: In order to achieve maximum cooling performance,
press
, A/C, , and set the temperature to 60°F (16°C) and the
highest blower setting.
1.
Defrost: Distributes outside air through the windshield defroster
vents and demister vents. Can be used to clear the windshield of fog and
thin ice. The system will automatically provide outside air to reduce
window fogging. To exit defrost, select another distribution mode.
2. Passenger side temperature control: Press to increase/decrease
the temperature on the passenger side of the vehicle. Allows the
passenger to choose and control a different temperature than the driver,
if desired.
3.
R
Rear defroster: Press to activate/deactive the rear window
defroster. Refer to Rear window defroster later in this chapter for more
information.
4. DUAL: Press to engage/disengage separate passenger side
temperature control.
5.
Passenger heated seat: Press to control the passenger heated
seat. Refer to Heated seats in the Seating and Safety Restraints
chapter for more information.
2008 Edge (edg)
Owners Guide (post-2002-fmt)
USA (fus)
Climate Controls
77
To Next Page
Loading...
Need help?
General
