126
SAFETY
STARTING
AND DRIVING
WARNING
LIGHTS AND
MESSAGES
SERVICING
AND CARE
TECHNICAL
SPECIFICATIONS
INDEX
KNOWING
YOUR CAR
IN AN
EMERGENCY
REPLACING FUSES
GENERAL INFORMATION fig. 30
Fuses protect the electric system: they
cut in (i.e. they blow) in the event
of a failure or improper action on
the system.
When a device does not work, check
the efficiency of its fuse: the filament
A must be intact. If it is not, replace
the blown fuse with another with
the same amperage (same colour).
B intact fuse.
C fuse with damaged filament.
To facilitate fuse replacement, use
the pliers D hooked to the fuse box
lid on the dashboard left-hand side.
Refer to the tables on the following
pages to identify the protection fuse.
fig. 30
KA00099m
Never replace a fuse
with metal wires
or anything else.
In case of general
protection fuse intervention
(MEGA-FUSE, MIDI-FUSE,
MAXI-FUSE) contact a Ford
Dealership.
WARNING
If a fuse blows again,
contact a Ford Dealership.
WARNING
If the general protection
fuse for safety systems
(air bag system, braking system),
power unit systems (engine system,
transmission system) or steering
system blows, contact a Ford
Dealership.
WARNING
Before replacing a fuse,
make sure that the ignition
key has been removed and that
all the other services are switched
off and/or disengaged.
WARNING
Never replace a fuse
with another with a higher
amp rating; DANGER OF FIRE.
WARNING
To Next Page
Loading...
Need help?
General
