154
SAFETY
STARTING
AND DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
SERVICING
AND CARE
INDEX
KNOWING
YOUR CAR
TECHNICAL
SPECIFICATIONS
READING TYRE MARKINGS fig. 4
Example: 175/65 R 14 82T
175 = Rated width (S, distance
between sidewalls in mm).
65 = Height/width ratio (H/S) in
percentage.
R = Radial tyre.
14 = Rim diameter in inches (Ø).
82 = Load rating (capacity).
T = Maximum speed rating.
WHEELS
RIMS AND TYRES
Pressed steel or alloy rims. Tubeless
radial carcass tyres. The vehicle
registration document also lists
all type-approved tyres.
IMPORTANT In the event of
discrepancies between the information
provided on this “Owner Handbook”
and the “Vehicle registration
document”, only the latter is valid.
For safe driving, the car must be fitted
with tyres of the same make and type
on all wheels.
IMPORTANT Do not use inner tubes
in the case of tubeless tyres.
fig. 4
KA00083m
SPACE-SAVER WHEEL
Pressed steel wheel. Tubeless tyre.
WHEEL GEOMETRY
Front wheel toe-in measured from rim
to rim: 1.8 ± 1 mm
The values refer to the car in running
order.
147-164 Ford KA EN_145-162 Ford KA IT 08/04/14 08:40 Pagina 154
To Next Page
Loading...
Need help?
General
