Ford RANGER User Manual

HAZARD WARNING FLASHERS
E71943
The hazard warning button is
located on the instrument panel.
Use it when your vehicle is creating a safety
hazard for other motorists.
Press the button to turn on the hazard
warning function, and the front and rear
direction indicators will flash.
Press the button again to turn them off.
Note: If used when the engine is not
running, the battery will lose charge. There
may be insufficient power to restart your
engine.
Note: Depending on applicable laws and
regulations in the country for which your
vehicle was originally built, the hazard
warning flashers may flash if you brake
heavily.
JUMP STARTING THE VEHICLE
WARNINGS
Do not use fuel lines, engine rocker
covers or the intake manifold as
grounding points.
Connect batteries with only the same
nominal voltage.
Use only adequately sized cables
with insulated clamps.
Never jump start the vehicle at the
auxiliary battery (if equipped).
Note: Do not disconnect the battery of the
disabled vehicle as this could damage the
vehicle electrical system.
Connecting the Jumper Cables
A
B
C
D
E102925
Flat battery vehicle.A
Booster battery vehicle.B
Positive connection cable.C
Negative connection cable.D
WARNING
Do not let the vehicles come into
contact when using booster cables.
1. Position the vehicles in a suitable
arrangement to connect the booster
cables.
2. Switch off the engine and any electrical
equipment.
179
Ranger (), EB3B-19G219-ZAB enAUS
Roadside Emergencies

Ford RANGER Specifications

General

Brand	Ford
Model	RANGER
Category	Automobile
Language	English