Fronius TransTig 2600 Cel User Manual

Before installation
Safety
WARNING!
Danger due to incorrect operation.
This can result in severe personal injury and damage to property.
▶
Do not use the functions until you have fully read and understood the Operating
Instructions
▶
Read and understand all the Operating Instructions for the system components,
especially the safety rules, in full
Intended use The power source is only intended for TIG welding and MMA welding.
Any other use is deemed to be "not in accordance with the intended purpose." The man-
ufacturer shall not be liable for any damage resulting from such improper use.
Intended use also means
- Following all the instructions in these Operating Instructions
- Carrying out all the specified inspection and maintenance work
Setup regulations The power source has been tested according to protection class IP 23. This means:
- Protection against penetration by solid foreign bodies larger than Ø 12.5 mm (.49
in.)
- Protection against spraywater at any angle up to 60° from the vertical
WARNING!
Danger from devices falling or toppling over.
This can result in severe personal injury and damage to property.
▶
Place devices on a solid, level surface so that they remain stable.
The ventilation channel is a very important safety device. When selecting the setup loca-
tion, ensure that the cooling air can enter or exit unhindered through the vents on the
front and back. Any electrically conductive dust (e.g. from grinding work) must not be
allowed to be sucked directly into the power source.
Mains operation Appliances are designed for the grid voltage stated on the rating plate. If the mains cable
or mains plug has not been attached to your version of the appliance, these must be
installed according to national standards. Fuse protection for the grid lead can be found
in the technical data.
WARNING!
Danger due to insufficiently dimensioned electrical installation.
This can result in severe personal injury and damage to property.
▶
The mains lead and its fuse protection must be rated accordingly
▶
The technical data shown on the rating plate applies
30

Fronius TransTig 2600 Cel Specifications

General

Brand	Fronius
Model	TransTig 2600 Cel
Category	Portable Generator
Language	English