Page 20
6.5.7 Lighting Menu Mode – If Fitted (Not Standard)
When in Lighting Menu Mode, the 7 Segment display
shows 3 horizontal lines.
Moving the joystick forward will toggle the Headlights.
Moving the joystick left will toggle the Left turn
Indicators.
Moving the joystick right will toggle the right turn
Indicators.
Moving the joystick backward will toggle the Hazard
Lights.
6.5.8 Lock Mode – If Fitted (Not Standard)
The Key Lock system uses a magnetic key to power the
wheelchair down to prevent subsequent unauthorized driving.
To Lock the system:
Swipe the magnetic key across the key symbol on the G90A
Remote. The system will beep and automatically power itself
down.
To Unlock the system:
Press the On/Off button to power up the system. The flashing
red key symbol shows the system is locked. Swipe the
magnetic key across the key symbol the LED will stop
flashing the chair may be driven as normal. If the wheelchair
is not unlocked, G90 will automatically turn itself off.
Moving the joystick will cause the power chair to drive in
that direction. The amount of joystick movement will
determine the speed that the power chair will move in that
direction.
Joystick Out of Neutral at Power up (OONAPU) occurs
if the joystick is out of neutral when switched on. If this
happens the System Status LED will flash constantly.
Releasing the joystick within a few seconds will cancel the
indication otherwise a ‘latching fault’ will occur.
To Next Page
Loading...
Need help?
General