FS S2800S Series User Manual

PWR SYS
1
2 4 6 8 10 12 14 16 18 20 22 24 26
PoE
28
2 5 7 9 11 13 15 17 19 21 23 25 27
Link/Act
Link/Act
RESET
S2800S-24T4F-P PoE+
21
43
65
87
109
1211
1413
1615
17
Installation Requirements
Before you begin the installation, make sure that you have the following:
The installation site must be well ventilated. Ensure that there is adequate airow around the
switch.
Site Environment:
Do not operate it in an area that exceeds an ambient temperature of 50°C.
Phillips screwdriver.
Standard-sized, 19" wide rack with a minimum of 1U height available.
Category 5e or higher RJ-45 Ethernet cables, ber optical cables , and console cable for
connecting network devices.
The installation site must be free from leaking or dripping water, heavy dew, and humidity.
Ensure rack and working platforms are well earthed.
Be sure that the switch is level and stable to avoid any hazardous conditions.
Do not install the equipment in a dusty environment.
8
EN

FS S2800S Series Specifications

General

Brand	FS
Model	S2800S Series
Category	Switch
Language	English