16 Appendix
656
Appendix
16
PCL Settings List
The following table describes the parameters that can be set with the mode menu.
Parameter Item No. Value
Paper tray 201 Sets the paper tray to be used for printing.
[0] (Default) : Auto
[1] : Tray 1
[2] : Tray 2
[3] : Tray 3
[4] : Tray 4
[5] : Tray 5
[6] : Tray 6 (HCF (A4 1 Tray) or (A4 2 Tray))
[7] : Tray 7 (HCF (A4 2 Tray))
Important • When Trays 1 to 4, Tray 6 to 7 is selected, the paper size is determined by the
size of paper loaded in the tray, and thus [Paper Size] cannot be set. Also, the
paper size of for Trays 3 to 4 is fixed at A4 size. To change the paper size,
contact our Customer Support Center.
Note • When [Auto] is selected and paper of the same size in the same orientation in
multiple trays is loaded, paper will be fed in the order of Tray 1 J Tray 2 J
Tray 3 J Tray 4 J Tray 6 J Tray 7. If paper of the same size is loaded in
multiple trays but in different orientations, feeding of the paper loaded in the
landscape orientation is prioritized.
Auto size 202 Sets the default paper size. Only available when [Paper Tray] is set to [Auto].
Only cut sheet can be set.
[3] : A3
[4] (Default) : A4
[5] : A5
[14] : B4
[15] : B5
[21] : 8.5 × 14"
[22] : 8.5 × 13"
[23] (Default) : 8.5 × 11"
[24] : 11 × 17"
[25] : Custom Size
[30] : 8K
Important • When Trays 1 to 4, Tray 6 to 7 is selected, [Paper Size] cannot be set. The
paper size loaded in the specified tray is displayed.
Note • When Trays 1 to 4, Tray 6 to 7 is selected, the paper size is determined by the
size of paper loaded in the tray, and thus [Paper Size] cannot be set.
• Depending on the combination of [Original Size] and [Paper Size], [?] may be
displayed for the magnification. In this case, the document is printed at a
scale of 100%.
Bypass size 203 Sets the default paper size. Only available when [Paper Tray] is set to [Auto].
Only cut sheet can be set.
[3] : A3
[4] (Default) : A4
[5] : A5
[14] : B4
[15] : B5
[21] : 8.5 × 14"
[22] : 8.5 × 13"
[23] (Default) : 8.5 × 11"
[24] : 11 × 17"
[25] : Custom Size
To Next Page
Loading...
Need help?
General
