5 Scan
318
Scan
5
2 Select [Store to USB] on the [Services Home]
screen.
3 The [Store to USB] screen appears.
When the Screen Display Does Not Change
1 If any screen other than the [Services Home]
screen is displayed, press the <Services Home>
button.
2 Select [Store to USB] on the [Services Home]
screen.
3 The [Store to USB] screen appears.
Important • Data stored in a USB memory device may be lost or damaged in the following cases. Make sure to
back up the data in the device before use.
- When disconnecting/connecting the USB memory device by methods other than described in this
guide.
- When receiving the effect of electrical noise or an electrical discharge
- When a fault or failure occurs during operation
- If the USB memory device receives mechanical damage
To Next Page
Loading...
Need help?
General
