2 Product Overview
54
Product Overview
2
2 Press the power switch to the [ ] position.
Important • Power off processing is performed internally
on the machine for a while after the power is
switched off. Therefore, do not switch the
main power off immediately after switching
the power off.
z
When the Finisher-B1 (optional), the Finisher-
C1 (optional), or the Finisher-C1 with Booklet
Maker (optional) is installed.
Important • Power off processing is performed internally on the machine for a while after the power is switched
off. Therefore, do not switch the main power off immediately after switching the power off.
Note • When powering the machine on after it has been switched off, wait 10 seconds after the touch
screen has gone dark.
Switching the Main Power Off
The following describes how to switch the main power off.
Important • Do not switch the main power off when a screen is displayed on the touch screen or while the
<Energy Saver> button is blinking. Switching off the main power under such circumstances may
damage the hard disk and the memory or cause a machine malfunction.
• Switch the main power off first when unplugging the power cord. Unplugging the power cord with
the main power on may damage the hard disk and the memory or cause a machine malfunction.
1 Make sure that the power is switched off.
2 Make sure that the touch screen is blank and the <Energy Saver> button does not light up.
3 Open the front cover.
To Next Page
Loading...
Need help?
General
