Configuring/Starting Job Flow
361
Send from Folder
6
îš„ Print
Files in a folder can be printed.
1 Select files on the [Folder - File List] screen.
2 Select [Job Flow Settings].
3 Select any option.
îš„ Auto Start
This sets auto start of the job flow for files stored in the folder. The job flow automatically
starts when a file is stored.
îš„ Start Current Job Flow
Select files in the folder, and then select this button to start the job flow linked to this folder.
Important •After executing the job flow, confirm the [Job Status] screen or print a Job History Report to check
the result. For information on the Job History Report, refer to "5 Tools" > "Common Service Settings"
> "Reports" > "Job History Report" in the Administrator Guide.
îš„ Cut Link
Cancels the link between a folder and the linked job flow sheet.
îš„ Create/Change Link
Displays the [Link Job Flow Sheet to Folder] screen.
Refer to "[Link Job Flow Sheet to Folder] Screen" (P.362).
îš„ Select Job Flow Sheet
Select this button while files are selected to display the [Select Job Flow Sheet] screen.
Refer to "[Select Job Flow Sheet] Screen" (P.364).
To Next Page
Loading...
Need help?
General
