15 Problem Solving
602
Problem Solving
15
3 Push Tray 6 in gently until it stops.
Paper Jams in Duplex Module B
The following describes how to clear paper jams occurring in the Duplex Module B if the
machine supports the 2 Sided Printing feature.
1 Open Tray 5 (1), lift up the release lever (2),
and then gently open the cover of the Duplex
Module B (3).
2 Remove the jammed paper.
Note • If the paper is torn, make sure no piece of
paper remains inside the machine.
3 Close the cover (1), and then close Tray 5 (2).
Paper Jams in Finisher-A1
The following describes how to clear paper jams occurring in the Finisher-A1 (optional).
The following shows the reference section for the procedures to clear a paper jam in each
location.
To Next Page
Loading...
Need help?
General
