Setup
309
Tools
5
1 Select [On].
2 Enter a 2-digit relay station ID with the
numeric keypad.
Note • The relay station ID is the address number
for the base station (the machine) already
registered on the relay station.
3 Select [Speed Dial 001<->099].
4 Enter a speed dial number of broadcast
destination (001 to 099) or group number (#01 to #09) registered on the relay station with
the numeric keypad, and then select [Add].
Note • If there are more than one broadcast destinations, repeat step 4.
5 To print a document also at the relay station, under select [On] for [Print at Relay Station].
6 Select [Save].
Billing - Day Time, Billing - Night Time, Billing - Midnight
Set the connection time for one unit charge in each of the time bands (daytime/night/
midnight).
You can set a value from 0.1 to 255.9 seconds in 0.1 second increments.
This item is displayed when [Accounting] > [Accounting Type] is set to [Local Accounting] and [Fax/Internet Fax Service] is
set to [Enable Accounting] under [Auditron Mode]. For information on how to enable the feature, refer to "Auditron Mode"
(P.317).
The information registered can be confirmed by printing a Billing Data List. For information about how to print, refer to
"Billing Data List" (P.124).
1 Select one of [Billing - Day Time], [Billing - Night Time], and [Billing - Midnight].
2 Select [Billing].
3 Enter the time for one unit charge from 0.1 to
255.9 seconds in 0.1 second increments with
the numeric keypad.
4 Select [Save].
Internet Fax Profile
Set the format of the Internet fax profile.
A profile is specified to restrict attribute information such as image resolution and paper size
for transmissions between Internet Fax-enabled machines.
TIFF-S
The Internet fax standard profile. For documents larger than A4, the size is automatically
reduced to A4 when transmission.
TIFF-F
Select this profile when you specify [Superfine] for [Resolution] or when you send A3 or B4
documents.
TIFF-J
Select this profile for sending documents in JBIG.