Fuji Xerox DocuCentre-V C4476 Administrator's Guide

DocuWorks Direct Print
697
Appendix
16
DocuWorks Direct Print
DocuWorks Direct Print is a feature that prints DocuWorks files by using the lpr command
directly instead of a print driver. When this feature is used, the following items will be printed
based on the settings of [DocuWorks] under [Print Mode].
Important • You cannot print DocuWorks files with Japanese fonts used.
Note • When you use the lpr command to print, specify the number of copies to be printed in the lpr
command. The copy quantity setting made on [Output Quantity] under [DocuWorks] becomes
invalid. If the copy quantity is not specified in the lpr command, only one copy is printed.
• Before you print DocuWorks file using the lpr command, the LPD protocol of the machine must be
started with the control panel or CentreWare Internet Services.
DocuWorks Direct Print Settings
This section describes the available settings with the DocuWorks Direct Print feature.
The settings configured here are valid when printing DocuWorks files without using
"ContentsBridge" provided by Fuji Xerox.
Note • For information on printing DocuWorks files using ContentsBridge Utility, refer to the manual
provided on the Media (Software/Product Manual).

Output Quantity

Layout

2 Sided Printing

Paper Size

Print Mode

Output Color

Collate
Setting Item
Item
Number
Value
Output quantity 501 Sets the number of copies to be printed.
[1-999] (Default: 1): 1-999 sheets
2 sided printing 502 Sets the 2 sided printing option.
[0] (Default) : 1 Sided
[1] : 2 Sided, Flip on Long Edge
[2] : 2 Sided, Flip on Short Edge
[2 Sided Print, Flip on Long Edge] prints 2 sided in the orientation so that
pages can be bound along the long edge.
[2 Sided Print, Flip on Short Edge] prints 2 sided in the orientation so that
pages can be bound along the short edge.
Print mode 503 Selects which you prioritize: image quality or print speed.
[0] (Default) : Standard
[1] : High Speed
[2] : Fine
The [Standard] setting prints in a standard speed and quality.
The [High Speed] setting prioritize the print speed.
The [Fine] quality setting prints in high quality but in a slower speed.
Collate 504 Selects whether to print multiple-sheet documents as collated sets (1, 2, 3...1,
2, 3...).
[0] (Default) : Off
[1] : On

Fuji Xerox DocuCentre-V C4476 Specifications

General

Brand	Fuji Xerox
Model	DocuCentre-V C4476
Category	All in One Printer
Language	English