Using the Operator Panel 103
Firmware Errors
Contact the Fuji Xerox local representative office or an authorized dealer if this error occurs repeatedly.
See also:
• "Online Services" on page 161
1 2 3 4 5 6 7 Cause/Remedy
Toner Power
Saver
Jam Start Error Load
Paper
Ready
YMCK
——— ——— —
A firmware error
occurred.
Press the (Stop)
button to clear the error.
See "Canceling a Print
Job" on page 82.
—— ——— —
A ROM erasing error
occurred.
Turn off the printer, and
then on.
— ——— —
A ROM writing error
occurred.
Turn off the printer, and
then on.
——— —
An error occurred while
downloading the
firmware.
Turn off the printer, and
then on.